Best current price£9.33from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£9.33Visit shop Unifix Grade 4.8 Studding Din 976-1-A Bzp - M8 X 1M - 5014196347943
Visit shop
The Range£9.53Visit shop Unifix Grade 4.8 Studding Din 976-1-A Bright Zinc Plated - M6 X 1M - Silver
Visit shop50 offers from £9.33 - £13.86
View price history by clicking the chart icon.
The Unifix Grade 4.8 Studding is a versatile hardware component engineered for construction and repair projects requiring a durable, threaded steel rod. Ideal for professionals and DIY enthusiasts involved in structural assemblies, this studding provides reliable strength and corrosion resistance thanks to its bright zinc-plated finish; however, users should ensure the Grade 4.8 specification meets the load-bearing requirements of their specific structural application compared to higher-tensile alternatives.
| Colour | Silver |
|---|---|
| Model Part Number | 5014196348247 |
| Brand | Unifix |
Grade 4.8 refers to the mechanical properties of the steel, indicating its tensile strength and yield point, suitable for general construction needs.
Yes, the bright zinc-plated finish provides good corrosion resistance for outdoor use, though it should be monitored for wear in highly corrosive or saline environments.
A metal hacksaw or an angle grinder equipped with a metal cutting blade is recommended.
Grade 4.8 is a standard carbon steel grade and is not heat-treated to the same levels as High Tensile (8.8) studding.
While the steel can be welded, the zinc plating should be ground off the weld area first for safety and quality, as zinc fumes are toxic.
Check for burrs on the cut end of the rod and file them down until the nut threads smoothly.
Wipe away surface debris and apply a light machine oil or a clear protective spray to inhibit further corrosion.
To ensure optimal performance, verify that your nuts and washers are also M24 threaded to match the rod. When cutting the studding to size, use a metal hacksaw or an angle grinder with a metal-cutting disc, and always file the cut end to prevent thread damage. Keep the rod clean and dry to maintain the integrity of the zinc-plated finish; if the finish is compromised during cutting, consider applying a cold-galvanizing spray to the exposed metal to prevent future oxidation.
