Knauf Cove - 127mm x 3m - White

Yes, the paper-faced surface is designed for direct paint application without the need for a primer, as long as the adhesive and any filler used are fully dry.

A high-strength grab adhesive or a specific coveline adhesive is recommended. Ensure it is suitable for gypsum-based materials and your wall/ceiling substrate.

Use a sharp craft knife or a fine-tooth saw with a mitre box to cut precise 45-degree angles for internal and external corners. Accuracy is key for a seamless finish.

While it can be used, it is primarily designed for general interior spaces. Avoid areas with high humidity or direct water exposure. If used in kitchens, ensure it is painted with a moisture-resistant paint and kept clean.

The moulding has a profile of 127mm (height/depth) and comes in lengths of 3 metres.

Clean gently with a soft, dry or slightly damp cloth. Avoid using abrasive cleaning agents or excessive water.

No, this product is designed for interior use only. Exposure to weather conditions will damage the gypsum material.

Ensure the wall and ceiling surfaces are clean, dry, and free from dust. Use a high-quality adhesive recommended for mouldings and apply it evenly. Consider using finishing nails for additional support.

Re-cut the mitre angles for a precise fit. Use a suitable filler or caulk to fill any small gaps after the adhesive has cured. Lightly sand smooth before painting.

Ensure the moulding surface is clean and free of dust before painting. Apply paint in thin, even coats. If the paper face has absorbed too much paint, it might become saturated; use a primer-grade paint or a diluted first coat if issues persist.

Carefully fill the chipped area with a suitable filler. Once dry, sand it smooth and prime (if necessary) before painting to match the surrounding area.