Best current price£23.15from eBay
Shopping.co.uk recommended and popular offers
eBay£23.15Visit shop Startech 3M 9.8Ft Lc To Lc Upc Os2 Single Mode Simplex Fiber Optic Cable 9/125 4
Visit shop4 offers from £23.15
View price history by clicking the chart icon.
This 2-meter OS2 single-mode simplex fiber optic patch cable is designed for IT professionals seeking to enhance CWDM applications and achieve high-speed connectivity (40G/100G) in robust network environments. Its key benefit lies in providing superior signal integrity and channel isolation over extended distances due to its bend-insensitive design and UPC-polished connectors. A potential caveat is its specific use case for single-mode fiber networks, requiring compatible equipment.
| Series | OS2 |
|---|---|
| Model Part Number | SPSMLCLC-OS2-2M |
| Brand | Startech |
OS2 is an updated standard for single-mode fiber that offers improved performance, particularly over longer distances and with higher bandwidth requirements. It is designed to meet stricter standards (like G.652.D and G.657.A1) and is generally recommended for new installations, while being backward compatible with OS1.
No, this is an OS2 single-mode fiber optic cable. It is not compatible with multi-mode fiber equipment, which uses different core sizes and light transmission principles.
Simplex indicates that the cable contains a single fiber strand and is designed for one-way data transmission. This is contrasted with duplex cables, which have two fibers for simultaneous two-way communication.
Bend-insensitive fiber has a special core design that reduces light leakage when the cable is bent. This makes the cable more durable and reliable in installations where it must be routed around tight corners or packed into small spaces.
LSZH stands for Low-Smoke Zero-Halogen. Cables with LSZH jackets are designed to emit minimal smoke and no toxic halogens when exposed to extreme heat or fire, making them safer for use in enclosed spaces, public buildings, and areas with strict safety regulations.
UPC (Ultra Physical Contact) polishing refers to the precise finishing of the fiber connector end-face, resulting in a smoother surface and better fiber alignment compared to older PC (Physical Contact) polishing. This leads to lower insertion loss and significantly improved return loss, which is crucial for high-speed and sensitive optical networks.
This OS2 single-mode fiber optic cable is engineered to support data rates of 40Gbit/s and 100Gbit/s, making it suitable for high-bandwidth network applications.
Check that the LC connectors are fully seated in their ports. Inspect connectors and ports for dirt or damage. Ensure the cable is not excessively bent or kinked. Verify that both connected devices are compatible with OS2 single-mode fiber and use LC connectors.
Ensure the cable is not the bottleneck. Verify that the network equipment on both ends supports the intended data rates (40G/100G). Check for other network issues that might be causing congestion.
This typically indicates a problem with the fiber connection. Re-clean the fiber ends and ferrules. Ensure the connectors are properly aligned and fully seated. If the issue persists, the cable may be damaged and require replacement.
Setup:
Compatibility:
Care:
