Blackmagic Design ATEM Mini Extreme ISO G2

ISO recording means the switcher records each of the 8 HDMI input sources and the main program output as separate, independent video files. This allows for maximum flexibility in editing after the live event.

Yes, you can record directly to a USB drive connected to the switcher, or utilize the 10G Ethernet port to save ISO files directly to a high-speed network-attached storage (NAS) device.

The ATEM Mini Extreme ISO G2 supports video input and output resolutions up to 1080p60.

While the switcher can perform basic switching without a computer, a computer running ATEM Software Control is required for advanced features like ISO recording configuration, DVE effects, chroma keying, and streaming setup.

It features two professional XLR audio inputs for high-quality microphone or line-level audio sources, alongside a 3.5mm headphone jack.

Picture-in-picture effects are configured and controlled using the built-in DVE (Digital Video Effects) within the ATEM Software Control application.

The integrated streaming engine is designed to stream to a single destination at a time. For simultaneous streaming to multiple platforms, you would typically use an external streaming encoder or a service that rebroadcasts your stream.

Verify the HDMI cable is securely connected at both ends. Ensure the source device is outputting a compatible resolution and refresh rate (up to 1080p60). Test the source device with a different display or cable.

Check XLR cable connections and ensure microphones or mixers are properly powered. Adjust audio levels within the ATEM Software Control. Confirm the selected audio source in the software is correct.

Ensure a stable and high-speed internet connection. Reduce the streaming bitrate in the ATEM Software Control if necessary. Close unnecessary applications on the computer connected via Thunderbolt if using it for streaming control.

Verify that the connected storage (USB drive or network drive) is properly formatted and has sufficient free space. Check the storage connection and ensure it's recognized by the ATEM Software Control. For network storage, confirm network connectivity and permissions.