Shopping.co.uk

Worktop Clamp - Forgefix - 150mm - 10 Pack

Worktop Clamp - Forgefix - 150mm - 10 Pack

Forgefix Worktop Clamps eliminate the need for surface-mounted worktop joining strips. The nut is ...

Best current price£4.25from Power Tools Direct

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
Power Tools Direct£4.25Visit shop

Fandf 10Wtc150 Worktop Clamps - Zinc Plated 150Mm (Bag Of 10)

Visit shop

All Offers

9 offers from £4.25 - £11.04

View price history by clicking the chart icon.

Power Tools DirectFandf 10Wtc150 Worktop Clamps - Zinc Plated 150Mm (Bag Of 10)
£6.95 delivery
£4.25
Visit shop
eBayForgeFix Worktop Clamp ZP 150mm Bag 10
£3.50 delivery
£6.27
Visit shop
B&QB&Q - 10Wtc150 Worktop Clamp Zp 150mm Bag 10 Forwtc150M
Free delivery in 1–3 days
£8.97
Visit shop
OnBuy.comForge 10Wtc150 Worktop Clamp Zp 150Mm Bag Of 10 5028485640639
Free delivery in 1–3 days
£9.17
Visit shop
Rapid Online - Rapid Electronics Ltd.ForgeFix 10WTC150 Worktop Clamp ZP 150mm Bag 10
Free delivery in 1–3 days
£9.98
Visit shop

Product Information

Full details

This guide is for anyone using Forgefix Worktop Clamps to join worktops. The primary benefit is the elimination of unsightly surface-mounted joining strips, resulting in a cleaner finish. Keep in mind that proper alignment and secure tightening are crucial for a strong, lasting joint.

All features

Model Part Number10WTC150
BrandForgefix

Extended Product Information

FAQs

What size holes do I need to drill?

You need to drill 35mm diameter holes.

What materials are the clamps made of?

The clamps are made of all steel construction with a zinc-plated finish.

Are these clamps suitable for all worktop thicknesses?

Ensure the length of the clamp is sufficient for the thickness of your worktops. The product states the length as 150mm

How do I ensure a strong joint?

Ensure the worktops are properly aligned before tightening, and tighten the nuts securely.

Can I use these clamps outdoors?

The zinc-plated finish offers some corrosion resistance but continuous outdoor exposure is not recommended.

What should I do if the nut strips during tightening?

If the nut strips, replace the clamp as it will not provide a secure joint.

Troubleshooting

Worktop joint is not flush.

Loosen the clamps, realign the worktops, and re-tighten. Ensure the holes were drilled accurately.

Clamp slips or doesn't hold firmly.

Check the diameter of the holes, ensure they are 35mm. Tighten the nut securely.

Clamp is too short for the worktop thickness.

The product information states the correct length for the clamp, measure your worktop to ensure the correct length is used.

Pros and Cons

Pros

  • Clean, professional finish without visible joining strips.
  • Strong and reliable worktop joints.
  • Durable all-steel construction with a zinc-plated finish.
  • Easy to install and use.
  • Compatible with a variety of worktop materials.

Cons

  • Requires access to the underside of the worktop for installation.
  • Precise drilling of holes is essential for correct alignment.
  • Joining very thick worktops might require longer clamps.
  • Potential for incorrect installation if not tightened properly.

Setup, Compatibility & Care

Setup:

  1. Drill 35mm diameter holes in the worktop according to the clamp specifications and worktop thickness.
  2. Insert the clamps into the holes.
  3. Position the worktops and align them carefully.
  4. Tighten the nut on each clamp, ensuring the worktops are securely joined.

Compatibility:

  • Suitable for worktops of various materials including laminate, wood, and composite.
  • Compatible with worktops that have the correct 35mm diameter holes.

Care:

  • Ensure that the worktops are protected from excessive moisture after installation.
  • Periodically check the tightness of the clamps, especially in areas with heavy use.

Price History

DatePrice
Visit shop