4-Port Ethernet Desktop PoE Switch - VISTA CCTV - VSW4
Best current price£19.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£19.99Visit shop 4 Port POE unmanaged switch VSW4 ideal for CCTV VISTA
Visit shopeBay£19.99Visit shop One Offer
1 offer from £19.99
View price history by clicking the chart icon.
Product Information
Full details
The VISTA CCTV VSW4 is a 4-port PoE unmanaged switch designed for security camera installations needing extended reach. Its key benefit is the ability to extend PoE and data transmission up to 250m in a dedicated '250m mode', overcoming standard Ethernet limitations. A caveat is that in this extended mode, PoE port speeds are reduced to 10Mbps and inter-camera communication is disabled.
All features
| Series | VSW4 |
|---|---|
| Model Part Number | VSW4 |
| Brand | VISTA CCTV |
Extended Product Information
FAQs
What is the maximum distance for PoE and data transmission?
In standard mode, the maximum distance is 100 meters. In the extended '250m mode', the reach is extended up to 250 meters.
Does the VSW4 support Gigabit Ethernet?
The VSW4 has dual uplink ports that can negotiate speeds up to 1,000Mbps (Gigabit Ethernet) for connection to your network backbone. The 4 PoE ports themselves operate at 10/100Mbps.
What happens to the port speed in 250m mode?
In 250m mode, the PoE port speeds are reduced to a maximum of 10Mbps to achieve the extended transmission distance.
Can cameras connected in 250m mode communicate with each other?
No, in 250m mode, inter-communication between individual PoE camera ports is disabled.
Is this switch managed or unmanaged?
The VSW4 is an unmanaged switch, meaning it offers plug-and-play functionality without the need for complex configuration.
What type of PoE standard does it support?
It supports the IEEE 802.3af standard for Power over Ethernet.
How do I switch between 100m and 250m modes?
Power off the switch, then use a small tool to flick the physical switch located on the device to your desired mode ('100m' or '250m'). Power the switch back on.
Troubleshooting
PoE device not receiving power
Ensure the device is within the specified transmission distance for the selected mode (100m or 250m). Verify the device is IEEE 802.3af compliant. Check the power adapter connection and ensure the switch is powered on.
No network connectivity to cameras
Confirm Ethernet cables are securely connected at both ends. Check if the switch is powered on and the link lights are active. Try a different Ethernet cable. Ensure the correct mode (100m or 250m) is selected based on cable length.
Slow network performance
If using 250m mode, note that speeds are reduced to 10Mbps per PoE port. For standard operation, ensure the uplink port is connected to a Gigabit network if possible. Check for cable damage or excessively long runs that may exceed specified limits.
Switch is unresponsive
Power cycle the switch by unplugging and re-plugging the power adapter. Ensure the power adapter is the correct one for the device. Check the power outlet.
Pros and Cons
Pros
- Significantly extends PoE and data transmission distance up to 250m.
- Simplifies installation with integrated PoE.
- Offers flexible uplink options for NVR/VMS connectivity.
- Easy to set up and use due to its unmanaged nature.
- Cost-effective solution for extending existing camera networks.
Cons
- Reduced port speed (10Mbps) in 250m mode.
- Inter-camera communication is disabled in 250m mode.
- Limited to 4 PoE ports.
- No advanced management features for network control.
Setup, Compatibility & Care
Setup:
- Connect your IP cameras to the 4 PoE ports on the VSW4 using standard Ethernet cables.
- Connect the VSW4 to your network via one of the dual uplink ports (choose 100Mbps or 1000Mbps depending on your network.
- Power on the device using the provided power adapter.
- To switch between modes: ensure the device is powered off. Use a small tool (like a paperclip) to flick the switch to the desired position (e.g., '100m' or '250m'). Power the device back on.
Compatibility:
- Compatible with standard IEEE 802.3af PoE devices.
- Supports 10/100Mbps Ethernet devices.
- Uplink ports support up to 1000Mbps negotiation, connecting to standard network switches, routers, NVRs (like Vista VIP series), or VMS servers.
- Note: In 250m mode, individual PoE camera ports cannot communicate with each other.
Care:
- Keep the device in a well-ventilated area to prevent overheating.
- Clean with a dry or slightly damp cloth. Avoid harsh chemicals or solvents.
- Ensure proper power supply is used as recommended by the manufacturer.