Best current price£28.00from Amazon
Shopping.co.uk recommended and popular offers
Amazon£28.00Visit shop Cmt Orange Tools Orange Cmt 838.190.11 Roundover Bit, 1/4-Inch Shank, 1/8-Inch Radius
Visit shop
eBay£29.99Visit shop CMT 838.190.11 Roundover Bit, 1/4-Inch Shank, 1/8-Inch Radius, Carbide-Tipped
Visit shop4 offers from £28.00 - £38.62
View price history by clicking the chart icon.
The CMT Roundover Bit (838.190.11) is an essential tool for woodworkers looking to add professional, decorative profiles to the edges of their projects. Designed for precision and safety, this bit is ideal for hobbyists and professionals who want to create clean, rounded edges with an elegant top-edge bead. While it provides exceptional results on most woods, users should ensure their router speed is correctly calibrated for the 3/4-inch diameter to prevent burning.
| Model Part Number | 838.190.11 |
|---|---|
| Brand | CMT |
No, this bit is designed specifically for wood and wood-based composites.
The Delrin material is softer than metal, which prevents it from leaving scratches or pressure marks on your workpiece.
This bit fits standard router collets that accommodate the specific shank size provided in your tool's manual.
Keep the bit clean by wiping it with a resin remover after use and avoid abrasive cleaning pads that could strip the coating.
Yes, its anti-kickback design makes it a safer choice for users developing their routing skills.
Reduce your feed rate or increase router speed; ensure you are not lingering in one spot during the cut.
Clean the Delrin bearing with a light degreaser or compressed air to remove wood dust and resin.
Check if the carbide edge has dulled and ensure you are routing in the correct direction relative to the grain.
To set up this bit, insert the shank into your router collet and tighten securely, ensuring the bit is seated deep enough for stability but not touching the bottom of the collet. For care, always inspect the Delrin bearing before use; if it is clogged with debris, clean it with a light solvent to ensure free rotation. After each project, clean the bit with a resin remover to maintain the effectiveness of the Orange Shield coating. Store the bit in a protective case to prevent damage to the carbide cutting edges.
