Best current price£30.00from eBay
Shopping.co.uk recommended and popular offers
eBay£30.00Visit shop Water Pump VKPC83259 SKF Coolant 1201G1 1201G9 1201K8 1609417680 9654514780 New
Visit shop
Amazon£38.69Visit shop SKF VKPC 83259 Water pump kit
Visit shop12 offers from £30.00 - £38.69
View price history by clicking the chart icon.
The SKF VKPC 83259 Water Pump is engineered for automotive enthusiasts and professional mechanics seeking a reliable cooling system replacement. As part of the prestigious Aquamax range, this pump provides efficient coolant circulation to prevent engine overheating; however, it requires precise alignment and proper tensioning of the timing belt during installation to ensure long-term functionality.
| Model Part Number | VKPC 83259 |
|---|---|
| Brand | SKF |
Yes, the VKPC 83259 includes all necessary gaskets and seals needed for a standard installation.
If you are experienced with timing belt replacement, you may be able to install it yourself. Otherwise, professional installation is recommended due to the technical nature of timing belt systems.
This pump features a 19-tooth drive gear.
No, this is a specific part. Always verify compatibility with your vehicle's make, model, and engine code before purchase.
While it varies based on driving conditions, many mechanics recommend replacing the water pump whenever the timing belt is serviced.
Verify that the gasket was seated correctly and all bolts were torqued to manufacturer specifications. Ensure the mating surface was clean and free of debris during installation.
Inspect the tension of the timing belt. Over-tensioning can put excessive strain on the pump bearings. Check that the 19 teeth of the gear are properly aligned with the belt.
Ensure the cooling system has been properly bled to remove trapped air pockets, which can prevent efficient coolant circulation.
Installation of the VKPC 83259 should be performed by a qualified technician, as it involves accessing the timing belt assembly. Always drain the cooling system completely before removing the old pump to avoid contamination. Ensure all mating surfaces are thoroughly cleaned of old gasket residue before applying the new seals. When mounting the pump, tighten bolts in a star pattern to ensure even pressure distribution. For ongoing maintenance, ensure you use the manufacturer-recommended coolant grade, as improper mixtures can accelerate the wear of the pump's internal seals. Periodically check for any signs of coolant weeping at the weep hole, which indicates a necessary inspection or replacement cycle.
