Harris Essentials Masonry Paint Brush - 100mm

While it can be used on rough-sawn timber, it is primarily designed for masonry and may be too coarse for smooth or finished wood surfaces.

It is generally too large and coarse for standard interior walls and may leave visible brush marks. It is best reserved for exterior rough textures.

If taking a short break, wrap the head tightly in plastic cling film to prevent the paint from drying on the bristles.

Yes, the synthetic bristles are durable enough to handle the high alkalinity of traditional masonry coatings like limewash.

It is not necessary, but lightly dampening the bristles with water before using water-based paint can help with smoother application.

Dried masonry paint is difficult to remove. Use a chemical brush restorer and soak for several hours, then rinse under high-pressure water.

Ensure the brush has been properly 'broken in' by flexing the bristles before the first paint application to remove loose factory fibers.

You may be applying too much pressure. Try using a lighter touch and ensure the brush is fully loaded with paint to allow the bristles to flow naturally.

Soak the brush in a compatible brush cleaner or warm soapy water for 30 minutes, then gently comb the bristles with a wire brush tool to work out the dried paint.