From the Anvil Butt Hinge - Polished Bronze

These hinges are manufactured from solid brass, containing a minimum of 85% copper.

The overall size is 64mm x 35mm, with a leaf thickness of 2mm.

Yes, the hinges are supplied as a pair with matching wood screws.

Yes, for heavier doors, fitting a pair and a half (three hinges) is recommended to provide extra strength and support.

Clean with a soft, dry or slightly damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals to protect the lacquer and finish.

The finish is achieved by aging the solid bronze and then re-polishing it by hand to create a contrast between lighter and darker areas, preserved by a lacquer.

These hinges are designed for interior cupboard and cabinet doors. For outdoor applications, a different type of hardware with appropriate corrosion resistance would be recommended.

Ensure hinges are correctly aligned and screws are fully tightened. A tiny drop of silicone-based lubricant can be applied to the hinge pin if necessary, avoiding excess that might attract dust or damage the finish.

Check that all hinges are installed straight and at the correct depth. Minor adjustments to hinge placement or screw tightness might be required. For significant misalignment, consider using three hinges for better support.

The protective lacquer may be compromised. Gently wipe with a soft cloth. Avoid harsh cleaning. If the lacquer is damaged, the underlying bronze may naturally oxidize or require professional refinishing.