Heavy Duty Rotary Pillar Drill - Dirty Pro Tools - 500w

The chuck capacity is 3mm to 16mm in diameter, allowing it to accept a wide range of standard drill bits within this size range.

This drill features 9 different speed settings to accommodate various materials and drilling tasks.

The sturdy cast iron table measures 160mm x 160mm and includes slots for securely clamping your workpiece.

It is a heavy-duty machine designed for stability. It should be securely mounted to a workbench using appropriate hardware to prevent movement during operation.

The overall height of the unit is 580mm.

The table is constructed from heavy-duty cast iron for maximum stability and durability.

The swing measurement is 290mm, which indicates the working diameter around the column.

Ensure the drill bit is correctly and securely tightened in the chuck. Verify that the chuck itself is properly seated and tightened onto the spindle. Check that the drill bit is not bent.

Verify the power cord is securely plugged into a working outlet. Check that the power switch is in the 'on' position. Ensure any emergency stop buttons are disengaged.

Confirm the drill is securely mounted to a stable surface. Check that the workpiece is properly clamped to the table. Ensure the drill bit is sharp and suitable for the material being drilled. Make sure all components are properly tightened.

Ensure the drill motor is completely stopped before attempting to change speed. Consult the manual for the specific speed adjustment procedure, as some systems may require repositioning of belts.