Deks Dektite Multicable Solar Flashing - SDA10MB
Best current price£54.91from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£54.91Visit shop B&Q - Dektite Nulead Multicable Blk 410X490mm (Dnls10Mb)
Visit shopB&Q£54.91Visit shop One Offer
1 offer from £54.91
View price history by clicking the chart icon.
B&QB&Q - Dektite Nulead Multicable Blk 410X490mm (Dnls10Mb)
Free delivery in 1–3 days
£54.91
Visit shop
Product Information
Full details
This guide is for installers and homeowners using the Deks Dektite Multicable Solar Flashing (SDA10MB) to pass solar cables through roofs. The primary benefit is a complete weatherproof seal, protecting your roof and cables. Note that the flashing is designed for up to 10 cables; exceeding this limit is not recommended.
All features
| Model Part Number | SDA10MB |
|---|---|
| Brand | DEKS |
Extended Product Information
FAQs
What type of roofs is this flashing compatible with?
The Deks Dektite Multicable Solar Flashing is compatible with both tile and slate roofs.
How many cables can it accommodate?
The flashing can accommodate up to 10 cables.
Is any sealant required for installation?
It is recommended to use sealant. Always follow the manufacturer's instructions.
How do I maintain the flashing?
Inspect the flashing periodically for any damage or wear. Clean with mild detergent and water if needed.
What should I do if the flashing leaks?
Check the seal around the cables and the roof. Re-seal if necessary.
What are the dimensions of the flashing?
Please refer to the product specifications for specific dimensions.
Can I use this flashing on a metal roof?
The flashing is specifically designed for tile and slate roofs. It is not recommended for use on metal roofs.
Where can I find the installation instructions?
Installation instructions are typically included with the product packaging. You can also find them on the manufacturer's website.
Troubleshooting
Water Leaks
Check the seal around the cables and the roof. Ensure the flashing is properly seated and sealed. Re-seal if necessary.
Flashing is not Sealing Properly
Make sure that the flashing is correctly aligned on the roof. Check for any obstructions or damage to the flashing. Make sure that the correct sealant is used.
Cables are Damaged
Inspect cables for any visible wear and tear. Ensure cables are not being pinched or stressed by the flashing. Replace damaged cables as needed.
Pros and Cons
Pros
- Provides a reliable weatherproof seal.
- Accommodates multiple cables, streamlining installation.
- Protects cables from the roof structure and environment.
- Easy to install with standard tools.
- Suitable for various roof types.
Cons
- Limited to 10 cables; may require multiple flashings for larger solar arrays.
- Requires careful installation to ensure a proper seal.
- The initial cost of the flashing adds to the overall project cost.
- Requires proper cable management to avoid stressing the seal.
- May require adjustments for unusual roof pitches or tile profiles.
Setup, Compatibility & Care
Setup
- Preparation: Identify the location on the roof where the cables will pass through. Ensure the area is clean and clear of debris.
- Hole Creation: Cut a hole in the roof, sized appropriately for the flashing and cables.
- Cable Insertion: Feed the solar cables through the flashing.
- Placement: Position the flashing over the hole, ensuring it sits correctly on the roof tiles/slates.
- Sealing: Secure the flashing according to the manufacturer's instructions. Use appropriate sealant if necessary.
Compatibility
The Deks Dektite Multicable Solar Flashing is compatible with tile and slate roofs. It is designed to accommodate various cable sizes, up to a maximum of 10 cables. Check the specific cable diameters to ensure compatibility.
Care
The flashing requires minimal maintenance. Inspect the flashing periodically for any signs of damage or wear. Clean the flashing if necessary, using a mild detergent and water. Avoid using abrasive cleaners or solvents that could damage the material.