Ryobi Snow Shovel - RY18ST25A-0

This snow shovel is part of the Ryobi 18V ONE+™ system and requires a Ryobi 18V ONE+™ battery for operation.

No, this is a bare tool offer, meaning the battery and charger are sold separately and must be purchased additionally if you do not already own compatible Ryobi 18V ONE+™ tools and batteries.

It is designed to clear light to moderate snowfalls, typically up to 6 inches deep. It is most effective on fresh, lighter snow.

The clearing width is 14 inches, allowing for efficient clearing of standard walkways and driveways.

Under optimal conditions, the snow can be thrown up to 20 feet.

While it can handle some heavier snow, it is best suited for lighter snow. For very deep or wet snow, multiple passes might be needed, or a more powerful machine may be required.

After use, clear snow and ice, wipe with a damp cloth, and store in a dry place. Ensure the battery is removed for long-term storage.

Ensure the battery is fully charged and correctly inserted into the tool. Check for any obstructions in the auger or discharge chute.

The battery charge may be low; try a fresh or fully charged battery. Check for packed snow or ice in the auger or discharge chute and clear any blockages.

Verify the charger is plugged in and the battery is properly seated in the charger. If the issue persists, try a different 18V ONE+™ battery with the charger to isolate the problem.