Home Treats Wall Panelling - Shaker Style

You'll need a measuring tape, saw (for cutting), pencil, level, adhesive (glue, nails, or screws), and a paint brush.

Yes, but ensure the area is well-ventilated and the panels are protected from direct water exposure. Consider using a moisture-resistant paint.

Use a fine-toothed saw to achieve clean cuts. Measure and mark the panels accurately before cutting.

Use construction adhesive or panel adhesive suitable for MDF and the wall material. Follow the manufacturer's instructions.

It is not recommended. Remove the wallpaper before installing the panels to ensure proper adhesion.

The panels are made of MDF wood, which is not fire-resistant. Take appropriate fire safety precautions.

Prime the panels first with a suitable primer for MDF wood. Then, apply two coats of your chosen paint, allowing each coat to dry completely.

Each kit contains six panels.

Ensure the wall surface is clean and dry. Use an appropriate adhesive for the wall type. Apply sufficient adhesive to the panel and hold it in place until the adhesive sets.

Measure and cut the panels accurately. Use a filler to fill any small gaps and sand smooth before painting.

Ensure the panels are clean and primed before painting. Use a high-quality paint suitable for MDF wood.