Geometric Multi Colored Chevron Pattern Kitchen Splashback - Warren Reed - Designer
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and renovators looking to add a unique and functional element to their kitchens. The Warren Reed Geometric Multi Colored Chevron Pattern Kitchen Splashback offers a durable, stylish, and easy-to-clean focal point, enhancing both the aesthetics and practicality of your cooking space. While it elevates kitchen design, proper installation using specific adhesive is crucial for its longevity and performance.
All features
| Model Part Number | WR00172-P447 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use for installation?
You must use a clear natural curing adhesive specifically designed for glass splashbacks. Always follow the adhesive manufacturer's instructions for application and curing.
Can this splashback be cut to size?
No, this splashback is pre-cut to specific dimensions and cannot be cut after delivery. Attempting to cut toughened glass can cause it to shatter.
How do I clean the splashback?
Clean the glass with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Wipe spills promptly and use a microfiber cloth for a streak-free finish. Avoid harsh chemicals.
Is the glass heat resistant?
Yes, the 6mm toughened glass is designed to withstand heat up to 400°C, making it suitable for use behind standard stovetops. Ensure normal safety clearances are maintained.
What are the available dimensions for this splashback?
This splashback is available in several sizes: W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
What is the warranty period for this product?
The splashback comes with a 1-year guarantee.
Can I drill holes in the glass for sockets or fixtures?
No, toughened glass cannot be drilled after manufacturing. Holes must be present in the wall behind where the splashback will be installed. This splashback is designed for installation without drilling through the glass itself.
Troubleshooting
Splashback won't adhere properly
Ensure the wall surface is clean, dry, and completely flat. Verify that the correct type of clear natural curing adhesive has been used and applied evenly with sufficient coverage. Check that the adhesive has been allowed to cure for the recommended time.
Bubbles or gaps visible behind the glass
This usually occurs during installation if air was trapped. If minor, you may be able to carefully release trapped air with a fine needle. For significant issues, the splashback may need to be removed and reinstalled with fresh adhesive, ensuring smooth, even pressure during application.
Print appears faded or damaged
The print is protected by the glass. If damage is observed, it's likely due to the use of abrasive cleaning products or physical impact. Switch to soft cloths and non-abrasive cleaners for maintenance.
Pros and Cons
Pros
- Adds significant visual appeal with a unique geometric design.
- Provides excellent protection against heat and oil splatters.
- Hygienic and simple to maintain cleanliness.
- Installation is straightforward without complex tools or drilling.
- Available in multiple sizes to suit various kitchen configurations.
Cons
- Requires specific clear natural curing adhesive for installation.
- Glass can be heavy, requiring careful handling during installation.
- Repairing chips or cracks on toughened glass is not possible; replacement is necessary.
- The patterned design might not suit minimalist kitchen aesthetics.
Setup, Compatibility & Care Instructions
Setup:
- Surface Preparation: Ensure the wall surface where the splashback will be installed is clean, dry, and smooth. Remove any existing backsplash or debris.
- Adhesive Application: Apply a clear natural curing adhesive evenly to the back of the glass splashback or directly to the wall according to the adhesive manufacturer's instructions. Ensure sufficient coverage for a secure bond.
- Placement: Carefully position the splashback onto the wall, applying gentle, even pressure. Work from top to bottom to avoid trapping air bubbles.
- Curing: Allow the adhesive to cure fully as recommended by the adhesive manufacturer before using the kitchen normally. This typically takes 24-48 hours.
Compatibility:
- This splashback is compatible with most standard kitchen wall types when installed with the recommended adhesive.
- It is suitable for use behind gas and electric stovetops, provided standard safety clearances are maintained and heat resistance limits are not exceeded.
Care:
- Clean the surface regularly using a soft, damp cloth and a mild, non-abrasive kitchen cleaner.
- Wipe away spills and splatters immediately to prevent staining.
- Avoid using abrasive scouring pads, harsh chemicals, or strong solvents, as these can damage the printed surface or the glass.
- For stubborn marks, use a glass cleaner and a microfiber cloth for a streak-free finish.