Fibre Optic DVI-D Extender - Lindy - Silver
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Lindy 1500m Fibre Optic DVI-D Single Link Extender is designed for professionals needing to transmit DVI-D signals over extended distances without signal loss. Its primary benefit is the ability to reach up to 1500 meters using standard fibre optic cable, ideal for large venues, digital signage, or connecting distant control rooms. A key caveat is its lack of HDCP support, meaning it cannot be used for protected content. This system includes a transmitter and receiver module that connects via a single LC duplex fibre optic cable, supporting resolutions up to 1920x1200 @ 60Hz.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 38113 |
| Brand | Lindy |
Extended Product Information
FAQs
What type of fibre optic cable is required?
The extender requires an LC duplex fibre optic cable. For distances up to 500m, a multimode (50/125µm) cable can be used. For distances up to 1500m, a singlemode (9/125µm) cable is necessary.
Does this extender support HDCP?
No, this product does not support HDCP (High-bandwidth Digital Content Protection). Therefore, it cannot be used to transmit protected content like Blu-ray movies or certain streaming services.
Can I use a DVI-I or DVI-A cable with this extender?
No, this extender is specifically designed for DVI-D (digital only) signals. It is not compatible with DVI-I (integrated analog/digital) or DVI-A (analog only) connections.
How are the extender modules powered?
The extender modules typically draw power directly from the DVI ports of the connected source and display devices. If your DVI ports do not provide sufficient power, external power adapters may be required (check the product manual or packaging).
What is the maximum resolution supported?
The extender supports HDTV resolutions up to 1920 x 1200 @ 60Hz, which is also commonly referred to as WUXGA. It also supports 1080p @ 60 Hz.
Is the fibre optic cable included with the extender?
No, the fibre optic cable is not included with the Lindy 1500m Fibre Optic DVI-D Extender. It must be purchased separately.
What is the warranty period for this product?
The Lindy 1500m Fibre Optic DVI-D Extender comes with a 2-year warranty.
Troubleshooting
No video signal on the display
Verify that the DVI-D cables are securely connected to both the source/display and the extender modules. Ensure the correct type of LC duplex fibre optic cable (multimode or singlemode) is used and is fully seated. Confirm the source and display are powered on and set to the correct input. Check that the fibre optic cable is not damaged. Note that HDCP-protected content will not display.
Flickering or intermittent video
This could be due to a poor connection or a damaged fibre optic cable. Reseat all DVI and LC connectors. Try a different, known-good LC duplex fibre optic cable. Ensure the cable is not exceeding its rated maximum distance for the type of fibre used.
Low resolution or distorted image
Confirm that the maximum resolution supported by the extender (1920x1200 @ 60Hz) is selected in your source device's display settings. Ensure the display device is also capable of handling the selected resolution.
Pros and Cons
Pros
- Achieves exceptionally long signal transmission distances (up to 1500m).
- Maintains uncompressed, high-quality video signals.
- Supports high resolutions up to 1920x1200 @ 60Hz.
- Compact modules for discreet installation.
- Easy to set up with standard fibre optic cabling.
Cons
- Does not support HDCP, limiting use with protected content.
- Fibre optic cable is not included and must be purchased separately.
- Requires specific DVI-D connections; not compatible with DVI-I or DVI-A.
Setup, Compatibility & Care
Setup:
- Connect the transmitter module to the DVI-D output port of your source device (e.g., computer, media player).
- Connect the receiver module to the DVI-D input port of your display device (e.g., monitor, projector).
- Connect the two modules using a single, appropriate LC duplex fibre optic cable (multimode for up to 500m, singlemode for up to 1500m). Ensure the cable is securely seated in the LC connectors.
- Power on your source device and display. The extender modules typically draw power from the connected DVI ports, but may include external power inputs if needed (check product packaging).
Compatibility:
- Video Input/Output: DVI-D Single Link (digital only).
- Cable Type: LC duplex multimode (50/125µm) or LC duplex singlemode (9/125µm) fibre optic cable. The maximum distance depends on the cable type.
- Resolutions: Up to 1920 x 1200 @ 60Hz / 1080p @ 60Hz.
- HDCP: Not supported. This device cannot be used for content protected by HDCP (e.g., Blu-ray discs, certain streaming services).
- Operating Systems: No specific drivers are required, making it OS-agnostic.
Care:
- Keep the LC fibre connectors clean. Use a specialized fibre optic cleaning tool or lint-free wipes with isopropyl alcohol if necessary.
- Avoid bending the fibre optic cable beyond its minimum bend radius to prevent damage.
- Store the modules in a dry, dust-free environment when not in use.
- Ensure adequate ventilation around the modules to prevent overheating.