Draper Moisture Meter - 43618

Locate the battery compartment (usually on the back), open it, and replace the old battery with a new one of the correct type. Ensure correct polarity (+/-).

This meter is designed for use with wood, plaster, and concrete.

Refer to the user manual for typical moisture content ranges for the materials you are testing. These ranges will help you determine if the material is too wet or dry.

While the meter can be used outdoors, avoid using it in heavy rain or extreme weather conditions. Direct sunlight may also affect the display readability.

Store the meter in a dry, room-temperature environment, away from direct sunlight and extreme temperatures. Clean the probes after each use.

The accuracy depends on the material being measured and the calibration of the device. Refer to the specifications in the user manual for more details.

Please check the product packaging or documentation for warranty information.

Check the battery and replace it if necessary. Ensure the battery is installed correctly.

Ensure the probes are making good contact with the material. Recalibrate the device according to the user manual. Check the material type setting.

Replace the battery. Avoid using the device in direct sunlight.

Ensure that the probes are fully inserted into the material. Check the material type setting.