Avid Revolve 12000FS Reel - 12000FS

The gear ratio is 4.6:1, providing a balance between power for retrieving line and speed.

The reel is equipped with 5 + 1 stainless steel ball bearings for smooth operation.

Yes, spare standard and deep spools are available separately from authorized dealers.

The reel weighs 663g.

The spool capacity is approximately 0.40mm/310m, 0.35mm/400m, and 0.30mm/550m.

Yes, it features a rapid front drag system and a controlled rear freespool drag system.

The reel comes with a black anodised aluminium handle, typically designed for a specific side, but can often be switched for ambidextrous use depending on the reel's specific design details. Please check the physical reel or manual for confirmation.

Rinse the reel with fresh water to remove dirt or salt. Check for any debris lodged in the handle mechanism. If the problem persists, the reel may require lubrication or professional servicing.

Ensure the line is correctly spooled onto the reel. The slow oscillation system should provide good line lay, but an improperly filled spool or incorrect line tension can cause issues. Check the line roller for damage or debris.

Ensure the drag washers are clean and free from grit. Avoid over-tightening the drag. If the drag remains inconsistent, it may require maintenance or replacement of drag components.

Verify that the instant anti-reverse mechanism is engaged correctly. Check that the spool is properly seated on the reel and that the drag is not set too loosely.