Citadel Colour Spray Paint - Chaos Black

Shake the can vigorously for at least 10-15 minutes. Ensure you can clearly hear the mixing ball(s) rattling inside.

It is strongly recommended to use this product outdoors or in a very well-ventilated area. Ensure you protect your surrounding surfaces from overspray.

Hold the can approximately 8-12 inches (20-30 cm) away from the model for best results. Experiment to find the optimal distance for your conditions.

This paint is designed for plastic, resin, and metal Citadel miniatures, but it is also compatible with most other plastic and metal hobby models.

After use, turn the can upside down and spray for a few seconds to clear any paint from the nozzle and prevent clogging for future use.

This specific product, Chaos Black, dries to a smooth matt finish.

The can size is 400ml.

Ensure the can was shaken adequately. Adjust the distance from the model (too close can cause pooling, too far can cause dusting). Apply in multiple thin coats rather than one thick coat. Check for adverse weather conditions (high humidity, extreme cold).

Turn the can upside down and spray briefly to clear the nozzle. If still clogged, remove the nozzle and soak it in lukewarm water, then clear with a fine pin or wire. Replace the nozzle securely. Ensure the can was not stored with a clogged nozzle.

This is often due to spraying from too far away or in very dry/windy conditions. Try applying closer and in a more sheltered environment. Ensure the paint has fully mixed.

This is usually caused by high humidity. Try spraying in a drier environment. If it occurs, it may need to be carefully stripped and reapplied.