Cuprinol Garden Shades - Summer Damson

While the paint is water-based and has low VOCs, it is specifically designed for exterior use and protection against weather. It is not recommended for interior surfaces.

Cuprinol Garden Shades is quick-drying. It can typically be recoated after 2-8 hours, depending on conditions.

This paint is primarily designed for wood, brick, stone, and terracotta. For metal, a specialized metal primer and paint would be more appropriate.

You can use a good quality brush or a sprayer for application. Ensure an even layer is applied for the best finish.

Clean brushes and spraying equipment immediately after use with water.

A matt finish has a low sheen and is not reflective, providing a natural, non-glossy appearance to the painted surface.

The 125ml tester pot is intended for checking colour and finish. It is not sufficient for painting larger items like fences or sheds, but may be adequate for small decorative items or touch-ups.

Ensure the surface was properly prepared, clean, dry, and free from contaminants. A suitable primer may be needed for non-porous surfaces.

Stir the paint thoroughly before and during application. Apply in thin, even coats, and avoid over-brushing. Ensure you are using the correct applicator for the surface.

Colors can vary based on the surface type, color of the base material, and lighting conditions. Test on an inconspicuous area first. This tester pot is ideal for verifying color in your specific environment.

Stir the paint well. If necessary and recommended for the specific product, a very small amount of water may be added, but avoid over-thinning.