The Dapetz Brake & Clutch Easy Bleeder Kit is a professional-grade tool designed for efficient, on...The Dapetz Brake & Clutch Easy Bleeder Kit is a professional-grade tool designed for efficient, one-person fluid replacement and bleeding. It operates using spare tyre air pressure (max 20 PSI, 10 PSI for older systems) and features a magnetic 500ml container to ensure secure placement during the process. The kit includes a 2m black air hose, multiple transparent connection and drain tubes, and a selection of reservoir cap sizes (25mm, 27mm, 44/45mm, and 46mm) to ensure universal compatibility with most vehicle types. This durable and comprehensive tool allows for single-handed operation, making it an essential addition to any garage or workshop.
The Dapetz Brake & Clutch Easy Bleeder Kit (DP14189) is an essential tool for automotive enthusiasts and professional mechanics who need to perform efficient, one-person brake and clutch fluid replacement. By utilizing spare tyre air pressure to force fluid through the system, it eliminates the need for manual pedal pumping; however, users must exercise caution to never exceed the recommended 20 PSI to avoid damaging the vehicle's brake reservoir.
All features
Model Part Number
DP14189
Brand
Dapetz
Extended Product Information
FAQs
Can I use this with a compressor instead of a spare tyre?
It is recommended to use a spare tyre because it provides a consistent, regulated low pressure. If using a compressor, you must use a precision regulator to ensure pressure never exceeds 20 PSI.
What is the maximum pressure I should use?
The absolute maximum is 20 PSI. For older vehicles or those with plastic reservoirs, 10 PSI is the recommended safety limit.
Is this suitable for ABS braking systems?
This kit is generally suitable for most hydraulic systems, but always consult your vehicle's service manual regarding specific ABS bleeding procedures.
How do I clean the kit after use?
Flush the container and lines with fresh brake fluid or a dedicated brake cleaning solution to remove debris and corrosive old fluid.
Does it fit all car models?
It fits a wide range of common vehicles using the four provided cap sizes, but it is not universal for every car model in existence.
Troubleshooting
Fluid not flowing into the system
Check all hose connections for air leaks and ensure the spare tyre has sufficient air pressure.
Air bubbles continue to appear in the drain tube
Ensure the reservoir cap adapter is seated tightly and the rubber seal is clean and undamaged.
Difficulty finding a proper cap seal
Verify that your specific vehicle master cylinder matches one of the four included sizes; if not, you may require an aftermarket custom adapter.
Pros and Cons
Pros
Enables true one-person operation
No pedal pumping required
Highly durable construction
Wide compatibility with common reservoir sizes
Easy to monitor fluid quality via transparent tubing
Cons
Requires careful pressure management (max 20 PSI)
Not suitable for vehicles with incompatible reservoir cap types
Requires access to a spare tyre for power
Requires periodic cleaning to prevent fluid residue buildup
Setup, Compatibility & Care
Setup: Select the correct reservoir cap adapter from the kit that matches your vehicle's master cylinder. Connect the air line to your spare tyre valve, ensuring the pressure does not exceed 20 PSI (use 10 PSI for older vintage braking systems).
Compatibility: The kit includes four primary adapter sizes (25mm, 27mm, 44/45mm, 46mm). Always verify your master cylinder thread and diameter before starting the process.
Care: After use, thoroughly flush the internal reservoir container and all transparent tubing with brake cleaner or fresh brake fluid. Store the components in a dry, cool area to prevent the rubber seals on the caps from drying out or perishing.