Best current price£2.77from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£2.77Visit shop R-Tech 524627 Microphone (Omni-Directional) 6Mm, Leads & Connector 5053556008988
Visit shop3 offers from £2.77 - £2.90
View price history by clicking the chart icon.
The R-TECH 524627 is an omnidirectional microphone designed for projects requiring compact audio capture. Its primary benefit is its small form factor and clear audio pickup across a wide frequency range. A key consideration is its low operating voltage, requiring careful integration into power-sensitive systems. This microphone features a 6mm diameter with wire leads and a connector, making it suitable for integration into various electronic devices and DIY projects.
| Model Part Number | 524627 |
|---|---|
| Brand | R-TECH |
The R-TECH 524627 microphone is designed to operate optimally at 2V.
While it captures a good range of frequencies, its sensitivity and omnidirectional pattern are best suited for general audio capture, voice commands, or embedded applications rather than critical professional studio recording.
Refer to the documentation for your specific project or evaluation board to correctly identify and connect the positive and negative leads to your power source and audio input circuit.
Omnidirectional means the microphone picks up sound equally well from all directions, making it versatile for capturing ambient sound or voice from varying positions.
The product information does not specify waterproofing. It is advised to keep the microphone clean and dry and avoid exposure to moisture.
The microphone has a frequency response range of 50Hz to 16000Hz.
The sensitivity rating is -38dB.
Verify power supply is stable at 2V. Check all wire connections for continuity and correct polarity. Ensure the audio input circuit on the receiving device is functioning correctly.
Confirm the microphone is placed close enough to the sound source. Consider adding a pre-amplifier circuit to boost the signal. Check for any obstructions near the microphone diaphragm.
Ensure the operating voltage is exactly 2V; deviations can cause distortion. Check for signal clipping in the audio processing circuitry. Reduce sound pressure levels if the source is too loud.
Setup: Connect the wire leads to your circuit according to the pinout provided by your specific project or evaluation board. Ensure the positive and negative leads are correctly identified and connected to the appropriate power and ground terminals, respecting the 2V operating voltage. The connector allows for plug-and-play integration with compatible modules.
Compatibility: This microphone is designed to work with low-voltage DC power sources. It is compatible with most microcontrollers and audio processing modules that can accept a standard analog audio signal and provide a stable 2V supply. Ensure your audio input circuitry is designed to handle the microphone's output level and impedance.
Care: Keep the microphone clean and dry. Avoid exposing it to excessive moisture, dust, or extreme temperatures, which could degrade performance or cause damage. When handling, be gentle with the wire leads and connector to prevent breakage.
