Shopping.co.uk

Oil and Fluid Extraction Siphon Pump and Container - 4 Litre

Oil and Fluid Extraction Siphon Pump and Container - 4 Litre

Handy siphon pump for garage or home use. Suitable for the extraction of oil and water from cars, ...

Best current price£23.40from B&Q

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £23.40

View price history by clicking the chart icon.

B&QB&Q - Oil And Fluid Extraction Siphon Pump And Container 4 Litre Sil103
Free delivery in 1–3 days
£23.40
Visit shop
eBayOil and Fluid extraction siphon pump and container 4 Litre Sil103
Free delivery in 1–3 days
£23.40
Visit shop

Product Information

Full details

This AB Tools 4-Litre Oil and Fluid Extraction Siphon Pump is designed for car, motorbike, marine, and commercial vehicle owners seeking a clean and efficient way to remove oil and other fluids. Its key benefit is mess-free extraction of up to 4 litres, even from difficult-to-reach areas via dipstick tubes. A potential caveat is the need for manual pumping to initiate flow, which may be less convenient than electric pumps.

All features

Model Part NumberSil103
BrandAB Tools

Extended Product Information

FAQs

What types of fluids can I extract with this pump?

This pump is suitable for engine oils, transmission fluids, gear oils, and water. It is not designed for flammable liquids like gasoline or solvents, nor for corrosive chemicals.

How do I clean the siphon pump after use?

After emptying, rinse the suction tubes and pump with soapy water, followed by clean water. Ensure all parts are dried thoroughly before storage.

What is the maximum amount of fluid the container can hold?

The integrated container has a capacity of 4 litres.

Can I use this pump to transfer fluids into a container?

While primarily designed for extraction, the pump could potentially be used for transfer with careful setup and appropriate connections, but its design focuses on outflow.

Are the suction tubes interchangeable?

Yes, the two supplied suction tubes (1.3m x 8mm and 1m x 5mm) can be used interchangeably depending on the access required.

Does the pump require batteries or electricity?

No, this is a manual siphon pump that operates through physical pumping action.

How long are the suction tubes?

The two suction tubes measure 1.3 metres and 1 metre in length.

Troubleshooting

Pump is not creating suction.

Ensure the suction tube is securely connected to the pump inlet and the outlet is sealed or functioning correctly. Check that the fluid level is sufficient for the suction tube to reach it. Pump vigorously to initiate the siphon effect.

Fluid is leaking from the pump handle or connections.

Verify that all connections are tight. Inspect the pump seals and tube O-rings for damage and replace if necessary. Ensure the anti-spill cap is properly secured if transferring fluid.

Extraction is very slow.

Confirm that the correct size suction tube is being used for the access point. Check for any kinks or blockages in the suction tube. Ensure the fluid being extracted is at a reasonable temperature (warmer fluids are generally less viscous and extract faster).

Container overfills quickly.

Use the flow control clip to reduce the rate of fluid transfer. Monitor the fluid level in the container regularly during operation.

Pros and Cons

Pros

  • Enables clean and spill-free fluid changes.
  • Long hoses provide excellent reach for various engine types.
  • Suitable for a wide range of vehicles and machinery.
  • Simple manual operation requires no power source.
  • Integrated container collects up to 4 litres of fluid.

Cons

  • Requires manual pumping to initiate and maintain suction.
  • May be slower than powered extraction methods.
  • Limited to non-corrosive fluids; not suitable for gasoline or strong chemicals.
  • Container size may be insufficient for very large fluid capacities.

Setup, Compatibility & Care Instructions

Setup:

  1. Select the appropriate suction tube size (8mm or 5mm) based on the access hole (e.g., dipstick tube).
  2. Connect the chosen suction tube firmly to the pump's inlet.
  3. Insert the other end of the suction tube into the fluid reservoir you wish to empty.
  4. Ensure the collection container is positioned below the fluid source.
  5. Begin pumping the handle to create suction and initiate fluid transfer. Use the flow control clip to regulate speed.

Compatibility:

  • Suitable for engine oils, transmission fluids, gear oils, and water.
  • Not suitable for flammable liquids such as gasoline, solvents, or corrosive chemicals.
  • Compatible with most cars, motorbikes, marine engines, commercial vehicles, and stationary engines.

Care:

  • After each use, empty the container and rinse the suction tubes and pump mechanism with a suitable cleaning fluid (e.g., soapy water) and then water.
  • Allow all parts to dry thoroughly before storing.
  • Store in a clean, dry place away from direct sunlight and extreme temperatures.
  • Periodically check the suction tubes and pump seals for any signs of wear or damage.

Price History

DatePrice
Visit shop