LOOK Kéo Grip Cleat - Grey

The primary advantage is the integrated non-slip surface, which provides significantly improved grip and stability when walking off the bike.

No, they are specifically designed for and compatible with the entire range of LOOK standard Kéo road pedals. They are not compatible with other LOOK pedal systems like X-Track or SPD-style pedals.

The Grey Kéo Grip Cleat offers the standard Keo float, which is typically around 4.5 degrees. This allows for a small amount of foot rotation while remaining clipped in.

The cleats offer 12mm of longitudinal (fore-aft) adjustment and 4mm of lateral (side-to-side) adjustment. Loosen the cleat screws, move the cleat to the desired position, and then re-tighten securely.

They are made from a combination of Polyacetate and PTFE, chosen for their excellent wear resistance and smooth operational characteristics.

Cleat lifespan varies greatly depending on usage, riding style, and the amount of walking performed. Inspect them regularly for wear, particularly on the leading edge and grip pads. Replace them when you notice significant wear or difficulty clipping in/out.

No, these cleats are designed for road cycling pedals (LOOK Kéo system) and are not compatible with mountain bike pedal systems like SPD or LOOK X-Track.

Ensure cleats and pedal interfaces are clean and free of mud or debris. Check for excessive wear on the cleat or pedal. Verify correct cleat alignment and tightness.

Avoid walking unnecessarily on abrasive surfaces. Ensure correct cleat tension on the pedal is not excessively high, which can increase wear. Check for proper pedal engagement and avoid forcing engagement.

Clean the cleat and pedal interface. Check that cleat screws are properly tightened. Consider a small amount of dry lubricant on the cleat surface if the issue persists after cleaning.

Check the tightness of the cleat screws on the shoe. Inspect the cleat and pedal for any damage or excessive wear that might prevent a secure connection.