Planed Pine Quadrant Moulding - (L)2400mm (W)27mm (T)27mm

You will need a measuring tape, saw (hand saw or mitre saw), pencil, adhesive (wood glue or construction adhesive), pins or nails (optional), hammer or pin gun, wood filler, sandpaper, and a damp cloth for cleaning.

Yes, this moulding is paintable. Ensure the surface is sanded smooth before applying paint. Prime the wood for better paint adhesion.

Wood glue or construction adhesive is recommended for this type of moulding. Ensure the adhesive is suitable for the surfaces you are joining.

For corners, use a mitre saw to make 45-degree angle cuts. This will allow the moulding pieces to fit together at a 90-degree angle.

This moulding is intended for indoor use. Exposure to outdoor elements may cause damage.

Use a soft, damp cloth to wipe the moulding. Avoid using harsh chemicals or abrasive cleaners.

You can easily cut the moulding to the desired length using a hand saw or a mitre saw. Ensure accurate measurements before cutting.

Please refer to B&Q's warranty information for details.

Ensure the surfaces are clean and free of dust and debris before applying adhesive. Use an appropriate adhesive for the surface and allow sufficient drying time. Reinforce with pins or nails.

Carefully measure and cut the moulding, especially for corners. Use wood filler to fill any small gaps.

Store the moulding in a dry, stable environment before installation. Ensure it's properly supported during and after installation.