Constant Voltage LED Driver - 24V DC - 60W - TGR-24V-60W
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This TIGER POWER SUPPLIES TGR-24V-60W is a super-slim, 60W constant voltage LED driver designed for powering LED lighting and other 24V DC devices. It's ideal for users needing a reliable, compact power solution for low-voltage LED installations, offering flexibility with no minimum load requirement. However, its IP20 rating means it's not suitable for damp or wet environments.
All features
| Model Part Number | TGR-24V-60W |
|---|---|
| Brand | TIGER POWER SUPPLIES |
Extended Product Information
FAQs
What is the IP rating of this LED driver?
The TIGER POWER SUPPLIES TGR-24V-60W has an IP20 rating, which means it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for dry indoor use only.
Can I use this driver with 12V LED strips?
No, this driver provides a constant 24V DC output and is only compatible with 24V DC LED strips or devices. Using it with 12V products will likely damage them.
What is the advantage of having 'no minimum load'?
The 'no minimum load' feature means you can use this driver for LED setups that consume less than its maximum 60W capacity without issue. This offers greater flexibility, especially for smaller lighting projects.
How do I calculate the total wattage of my LED strip?
Check the specifications of your LED strip. It is usually listed as watts per meter (W/m) or watts per foot (W/ft). Multiply this value by the total length of the strip you are using to get the total wattage required.
Is this LED driver dimmable?
This is a constant voltage LED driver and does not inherently support dimming functions on its own. To dim LED lights powered by this driver, you would need to use compatible 24V DC dimmable LED strips and a separate PWM (Pulse Width Modulation) dimmer controller.
What is the warranty period for this product?
Please refer to the retailer or manufacturer's documentation for specific warranty information, as warranty periods can vary.
Can this driver be used outdoors?
No, due to its IP20 rating, this driver is designed for indoor use only and must be protected from moisture, dust, and outdoor elements.
Troubleshooting
LEDs do not turn on
Verify that the input power is connected correctly and the voltage is within the 200-240V AC range. Check that the output wires are securely connected to the LED load, paying close attention to polarity (+/-). Ensure the total load does not exceed the driver's 60W capacity.
LEDs flicker or are dim
Check all connections for looseness or poor contact. Ensure the total power consumption of the LEDs is within the driver's 60W limit. If using a very low-power LED setup, confirm the 'no minimum load' feature is functioning as expected and all connections are sound.
Driver shuts down intermittently
This may indicate an overload condition or a short circuit. Check the wiring for any shorts. Reduce the load if it is close to the 60W maximum. Allow the driver to cool down if it feels excessively hot; ensure ventilation is adequate.
Pros and Cons
Pros
- Versatile with no minimum load requirement.
- Compact and slim design for easy installation.
- Built-in safety features (overload, short circuit, open circuit protection).
- Automatic recovery from fault conditions.
- Stable 24V DC constant voltage output.
Cons
- IP20 rated, meaning it is not waterproof or dustproof and suitable only for dry indoor use.
- Requires a compatible input voltage range (200-240V AC).
Setup, Compatibility & Care
Setup:
- Wiring: Connect the input wires (Live, Neutral) to the appropriate terminals on the driver, ensuring the input voltage is within the 200-240V AC range. Connect the output wires to your 24V DC LED load, observing polarity (+/-).
- Mounting: Mount the driver in a dry, well-ventilated indoor location, away from direct heat sources.
Compatibility:
- Input Voltage: Compatible with standard 200-240V AC mains power.
- Output Voltage: Designed exclusively for 24V DC LED products or devices.
- Load Capacity: Ensure your total LED load does not exceed the 60W (2.5A) maximum output.
Care:
- Cleaning: Disconnect power before cleaning. Wipe the exterior with a dry or slightly damp cloth. Avoid using solvents or abrasive cleaners.
- Ventilation: Ensure adequate airflow around the unit. Do not cover ventilation openings.
- Environment: Operate only in dry indoor environments due to its IP20 rating.