DAS Modelling Clay - Wood - Brown

Yes, DAS Wood Modelling Clay is dermatologically tested, conforms to European toy legislation, and is ACMI certified with an AP Seal, making it safe for use in schools and by hobbyists of all ages. Adult supervision is recommended for younger children during use.

Drying time varies significantly depending on the thickness of your creation and environmental conditions (humidity, temperature). It typically ranges from 24 hours for thinner pieces up to a week or more for very thick sculptures. The slow drying allows for carving and refining during this period.

Absolutely! Once your DAS Wood Modelling Clay creation is completely dry and hard, it can be painted with various types of paints, such as acrylics, oils, or tempera. You can then apply varnish for added protection and a desired finish (e.g., matte, gloss).

The clay is easy to work with using standard modeling tools, scalpels, and spatulas. You can also use your hands and simple household items to shape and add details. Ensure tools are clean before and after use.

If your clay starts to feel stiff or a little dry during your creative process, you can revive it by kneading a small amount of water into it. Be sure to add water gradually to avoid making it too soft or sticky.

Once dry, the clay is hard and durable, but it is not inherently waterproof. To make your finished piece water-resistant, you would need to apply a waterproof varnish or sealant after painting, ensuring full coverage.

Knead a small amount of water into the clay. Add water gradually until the desired pliability is achieved. Be careful not to add too much water at once.

Cracking often occurs due to uneven drying, if the piece is too thick, or if it dries too quickly. Try to dry thicker pieces more slowly by covering them loosely with plastic wrap for the initial drying stages, allowing moisture to escape gradually. Ensure consistent thickness throughout the sculpture where possible.

Drying time varies significantly with the thickness of your creation and environmental humidity. Ensure the piece is in a well-ventilated area. Avoid placing it in direct heat sources, as this can lead to cracking. Patience is key for very thick or intricate pieces.

Work the clay thoroughly to eliminate air bubbles before shaping. Use a small amount of water on your fingertips or tools to smooth surfaces while modeling. For final smoothing during the drying phase, fine-grit sandpaper can be used once the clay has partially hardened but is not yet fully dry.