Best current price£13.79from Water Irrigation
Shopping.co.uk recommended and popular offers
Water Irrigation£13.79Visit shop HydroSure Soaker Hose Double Barbed Reducing Tee - 13mm x 4mm - Black - Pack of 25
Visit shop1 offer from £13.79
View price history by clicking the chart icon.
This guide is for gardeners and landscapers looking to efficiently expand their irrigation systems. The HydroSure Soaker Hose Reducing Tee offers a reliable way to branch smaller 4mm feeder pipes from a main 13mm pipe, improving water distribution to specific plant areas. A key benefit is the secure double-barbed connection, minimizing pipe dislodgement, though it's important to note the operating pressure limit of 300 kPa to ensure longevity.
| Colour | Black |
|---|---|
| Model Part Number | 47765 |
| Brand | HydroSure |
This reducing tee connects 13mm irrigation pipe to 4mm micro (feeder) pipe.
A pack contains 25 HydroSure Soaker Hose Reducing Tees.
The operating pressure should not exceed 300 kPa.
Push the pipe firmly onto the double-barbed fittings until it is fully seated. The double barb provides extra grip.
No, this is a reducing tee designed to branch 4mm pipe off a 13mm pipe. It has two connections for 13mm pipe and one for 4mm pipe.
While designed for irrigation systems, it is durable for outdoor use but should be protected from extreme physical damage.
The reducing tee is black.
Ensure the 4mm or 13mm pipe is pushed fully onto the barbs. Check for debris on the pipe or barb. If the pipe is old or stiff, it may need warming slightly to ease installation. Ensure operating pressure is within the recommended limit.
The double barb is designed for retention. Ensure the pipe is inserted past both barbs. If the pipe is very loose on the 13mm line, consider using a clamp or ensuring the pipe is fully seated. Do not exceed recommended operating pressures.
Check the 4mm pipe for kinks or blockages. Ensure the tee itself is not clogged with sediment. Verify that the overall system pressure is not too low.
To set up the HydroSure Reducing Tee, simply push the 13mm irrigation pipe firmly onto the two larger barbed ends. Then, insert the 4mm micro (feeder) pipe onto the smaller barbed end. Ensure the pipes are pushed on fully to create a secure seal. These tees are compatible with standard 13mm and 4mm irrigation tubing. To care for the reducing tees, periodically check connections for any signs of wear or blockage. Clean any debris that may accumulate around the connection points. Avoid exposing the tees to excessive heat or physical damage. Ensure operating pressure remains below 300 kPa.
HydroSure Soaker Hose End Plug - Black - Pack of 25From £9
JG Speedfit Double Check Valve - 15mmFrom £91
Laowa 24mm f14 Macro Probe Lens - Nikon FFrom £1049
15mm Pipe Reducer - 15mm Push Fit X 1/4" Push Fit - DMFitFrom £8
HydroSure Double Barbed Tee 14mm - Black - Pack of 100From £9
PondXpert Elbow - 40mmFrom £5
Dapetz Inline Quick Release Gas Hose Connector - 8mmFrom £7
Hozelock Universal Flow Controller - 1758From £25
Beurer HT80 Rotating Hot Air Brush - BlackFrom £55
Pond Hose Connector - 12mm x 20mmFrom £3
Hozelock Reducing Connector - 12mm x 25mmFrom £3
Baxi Boiler Flue Terminal - BlackFrom £120