UGREEN NASync DXP480T Plus NAS Enclosure - 4 Bay

It supports 3.5-inch and 2.5-inch SATA HDDs and SSDs. Each bay can hold up to 8 TB.

Yes, the NAS enclosure does not come with hard drives. You need to purchase and install your own SATA drives.

With four bays supporting up to 8 TB each, the maximum storage capacity is 32 TB.

Yes, the NAS comes with 8 GB of RAM and can be expanded up to 64 GB for enhanced performance on demanding tasks.

The NAS supports various RAID configurations, including RAID 0, 1, 5, 10, and JBOD, allowing you to balance performance, redundancy, and capacity according to your needs.

The management interface is typically accessed via a web browser, making it compatible with most modern operating systems like Windows, macOS, and Linux. Specific desktop client applications may also be available.

Yes, the 10GbE port is backward compatible and will function at 1GbE speeds if connected to a 1GbE network switch or device.

Verify the power adapter is securely connected to both the NAS and a working power outlet. Check if the power button has been pressed correctly.

Ensure drives are correctly installed in their bays and properly seated. Check drive compatibility (SATA interface). Try re-seating the drives.

Confirm you are using a 10GbE connection on both the NAS and your client device, if applicable. Ensure your network cables are Cat6 or higher. Check for other network traffic impacting performance.

Access the NAS management interface to identify the failed drive. If possible, replace the failed drive with a new, compatible one. Initiate a RAID rebuild process through the interface.

Check that the NAS is connected to your network via Ethernet and powered on. Verify its IP address and ensure it is on the same subnet as your computer. Reboot both the NAS and your router.