Best current price£3.65from Amazon
Shopping.co.uk recommended and popular offers
Amazon£3.65Visit shop Prodec Contractor 9 Inch X 1.75" Long Pile Polyester Paint Roller, 9"
Visit shop6 offers from £3.65 - £15.21
View price history by clicking the chart icon.
This ProDec Contractor roller sleeve is designed for tradespeople and DIY enthusiasts seeking an economical yet effective solution for painting interior and exterior walls and ceilings with emulsions and masonry paint. Its key benefit is providing a trade-quality finish at a budget-friendly price point. A potential caveat is its suitability for semi-rough to rough surfaces, meaning it may not be optimal for very smooth finishes.
| Model Part Number | PRRE019 |
|---|---|
| Brand | ProDec Contractor |
This roller sleeve is ideal for emulsion paints (matt, silk, eggshell) and masonry paints due to its long pile, which effectively holds and applies these thicker coatings.
While it can be used, this long pile roller is not the optimal choice for gloss paints. A shorter pile roller is generally recommended for a smoother, blemish-free finish with gloss and solvent-based paints.
It is best suited for semi-rough and rough surfaces, including interior and exterior walls and ceilings. It can help to cover minor imperfections on these types of surfaces.
For water-based paints, clean with warm soapy water, rinse thoroughly, and allow to air dry. For solvent-based paints, use the appropriate solvent recommended by the paint manufacturer.
You will need a roller frame with a 1.5" (38mm) diameter core to fit this roller sleeve.
While it can be used, a shorter pile roller is generally preferred for very smooth surfaces to achieve the smoothest possible finish without leaving texture. This long pile sleeve is better suited for surfaces with some texture.
With proper care and cleaning, this trade-quality roller sleeve is designed for durability and can be reused for multiple projects.
Ensure the sleeve is properly attached to the frame. If shedding persists, try rinsing the sleeve with water (for water-based paints) or the appropriate solvent (for oil-based paints) and allow it to dry completely before use. A brief initial roll on a waste surface can also help remove loose fibers.
Ensure the roller sleeve is fully saturated with paint but not overloaded. Apply consistent pressure and use overlapping strokes. Check that the surface is not too smooth for the long pile, or consider a shorter pile sleeve if the surface is very smooth.
This can occur if the paint is too thick or if the roller is overloaded. Try thinning the paint slightly according to manufacturer instructions or ensure you're not applying excessive paint. Ensure the sleeve is clean and free from debris.
Setup:
Compatibility:
Care:
