Best current price£149.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£149.90Visit shop VEVOR Pneumatic Paste Liquid Filling Machine, 5-50ml Bottle Filler, Bottle Filling Machine, Stainless Steel Liquid Filler with Pedal for Milk Water Juice Shampoo Honey
Visit shop1 offer from £149.90
View price history by clicking the chart icon.
The VEVOR Pneumatic Paste and Liquid Filling Machine (A02) is designed for small to medium-scale producers, such as artisan food makers and cosmetics businesses, looking to streamline their packaging process for liquids and pastes. It offers a key advantage in efficiency through its pneumatic, pedal-operated design, allowing for consistent and precise volume control; however, it requires an external air compressor to function, which is not included with the unit.
| Model Part Number | A02 |
|---|---|
| Brand | VEVOR |
Yes, this is a pneumatic device and requires an external air compressor to provide the pressure needed to operate the piston.
It is designed for standard operating temperatures. If filling hot liquids, ensure the temperature does not exceed the material limits of the internal seals.
Run warm water or a safe cleaning solvent through the machine until the output is clear, then disassemble the hopper and nozzle for a deep manual clean.
Yes, there is a manual adjustment dial on the unit that allows you to set the desired volume between 5ml and 50ml quickly.
This machine is designed for liquids and smooth pastes. Large chunks may clog the internal valves and are not recommended for this specific model.
The hopper is constructed from food-grade stainless steel for durability and easy cleaning.
Check the stroke adjustment dial to ensure it is locked in place and verify that the air pressure remains constant during operation.
Confirm that the air compressor is connected and providing sufficient PSI, and check for any blockages in the nozzle or internal tubing.
Clean the nozzle tip of any debris and ensure the O-ring seals are properly seated and not worn out.
To set up the machine, place it on a stable, level workbench and connect your air compressor to the pneumatic intake using standard industry fittings. Ensure the air pressure is adjusted appropriately for the viscosity of your product. Before the first use, flush the system with warm water or a suitable cleaning solution to ensure the internal cylinder is clear of manufacturing residues. For care, disassemble the hopper and nozzle after each production run to prevent cross-contamination or the hardening of product residue. Wipe down the exterior with a non-abrasive cloth and ensure all seals are intact before reassembly.
