Door Hinge - Gold - No65

The hinge has a brass effect finish, indicating it is likely made of metal coated with a brass-like appearance, rather than solid brass.

These hinges are intended for indoor use, specifically on counterflaps. Prolonged exposure to moisture or outdoor elements may affect the brass effect finish.

They are suitable for most common woods used in furniture making, such as pine, oak, or MDF, provided the wood is solid enough to support the hinge and flap.

For most standard counterflaps, two hinges are usually sufficient. For larger or heavier flaps, consider using three hinges for added support.

While it might be possible, painting or refinishing over the brass effect finish could alter its appearance and may not adhere well without proper preparation. It is generally recommended to use them as supplied.

The product information does not specify an exact weight capacity, but they are designed for lightweight applications like counterflaps. Avoid using them for heavy doors.

Ensure screws are not overtightened, which can bind the hinge. Check for any debris obstructing movement and clean if necessary. A small amount of lubricant may help if the stiffness persists.

Verify that all hinges are installed at the same depth and angle. Slightly adjust screw positions if needed to achieve a flush finish.

Ensure you are using appropriate wall plugs or anchors if fixing into drywall or a less solid material. For wood, pilot holes slightly smaller than the screw diameter can improve grip.