SupaDec Cage Frame Paint Roller & Tray Set - 7 Inch

This set is ideal for use with emulsion paints, commonly used for interior walls and ceilings.

While it may be possible with certain formulations, the polyester roller is optimized for emulsion paints. For gloss or satin paints, consider a roller cover specifically designed for those finishes.

For water-based emulsion paints, clean the roller sleeve immediately after use with warm water and mild soap. Rinse thoroughly and allow it to air dry completely.

The set includes a 7-inch (175mm) polyester roller refill.

The set is best suited for smooth to semi-smooth surfaces. For heavily textured walls, a roller with a longer pile might be more effective.

The roller sleeve should be replaced when it shows significant wear, shedding, or no longer provides a smooth finish. For regular use, multiple sleeves may be needed per project.

Yes, you can purchase replacement 7-inch roller sleeves that are compatible with standard cage frames like the one provided in this set.

Ensure the roller sleeve is evenly saturated with paint and not overloaded. Check for debris on the roller or surface. Use consistent, even pressure while rolling.

Avoid overloading the roller with paint. Roll at a moderate pace and avoid vigorous or jerky movements. Ensure the roller cover is securely fitted to the frame.

Ensure the frame's end caps are clear of paint or debris. Apply a small amount of water or lubricant if necessary. Make sure you are aligning the sleeve correctly with the frame's wires.

Ensure the tray is placed on a stable, level surface. For very large amounts of paint, consider using a larger or sturdier tray if needed for heavier loads.