GOBEST Tile Diamond Disc - 125mmx22.2 bore

This disc is specifically designed for cutting ceramic, glazed tiles, and glass. It may perform adequately on some types of porcelain but is not recommended for very hard stones or concrete.

The specific disc in this guide is the 125mm x 22.2mm bore variant.

While it is a diamond disc, it's designed for angle grinders. Using it on a tile saw may not provide the correct cutting action and could be unsafe. Always use the disc with the tool it was intended for.

Use slow, steady pressure and consider a wet cutting method. Ensure the glass is properly supported and secured. A light score line before the cut can sometimes help.

Always wear safety glasses, hearing protection, and gloves. Ensure good ventilation and consider a dust mask. Secure your workpiece and maintain a firm grip on the angle grinder.

The lifespan depends on the material being cut, the frequency of use, and proper care. For its intended applications, it offers good durability.

Yes, it can be used for dry cutting. However, for materials like glass or for extended use, a wet cutting method can help reduce heat and dust, improving the cut quality and disc life.

Ensure the disc is correctly mounted and not damaged. Check if the material being cut is within the recommended range (ceramic, glaze, glass). Apply consistent, moderate pressure.

Reduce cutting speed and pressure. Ensure the disc is sharp and clean. For very delicate materials, consider a wet cutting method or a specialized glass cutter.

Check for proper mounting and ensure the grinder's flanges are clean and flat. The disc may be damaged or warped; replace if necessary.