Eaton RMQ-Titan Selector Switch - Toggle Black

The Eaton M22-WK is a 2-position, momentary toggle switch used for selection and switching functions in industrial control panels and machinery.

Momentary means the switch's contacts are only active as long as the toggle is being held in the actuated position. When released, it returns to its default state.

The Eaton M22-WK has an IP66 rating, which means it is protected against dust ingress and high-pressure water jets.

The switch has a width and height of 29.7 mm and a depth of 45.9 mm.

While it can technically control a circuit, its 'momentary' nature makes it best suited for temporary actions. For a latching 'on' or 'off', a different type of switch might be more appropriate.

The front ring is made of durable PVC.

The switch can operate within a temperature range of -25 °C to 70 °C.

Verify that the toggle is fully engaged. Check internal wiring connections for continuity and ensure the switch is correctly mounted in its housing. Confirm the circuit it controls is functional.

Ensure the switch is wired for momentary operation. Some switches can be configured for latching or momentary use; confirm your wiring matches the intended momentary function.

Inspect the toggle and surrounding area for debris or damage. If the issue persists, the switch may require replacement due to internal wear.

Ensure all seals and gaskets are intact and properly seated. Check that all cable entries are sealed correctly. Avoid exposing the switch to pressures or water jets exceeding the IP66 rating.