Cables Direct Cat5e RJEXT-05
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Cables Direct Cat5e RJEXT-05 is a 5-meter, grey, unshielded twisted pair (UTP) Ethernet extension cable designed for users needing to extend an existing network connection. Its primary benefit is providing a simple, cost-effective way to increase the reach of your network without replacing the entire cable run. A potential caveat is that, being UTP, it may be more susceptible to electromagnetic interference in environments with high electrical noise compared to shielded alternatives.
All features
| Series | Cat5e |
|---|---|
| Model Part Number | RJEXT-05 |
| Brand | Cables Direct |
Extended Product Information
FAQs
What is the maximum speed this cable supports?
This Cat5e cable supports data transfer rates up to 1000 Mbps (Gigabit Ethernet) and frequencies up to 350 MHz.
Can I use this cable outdoors?
This cable is designed for indoor use. Outdoor use may expose it to elements that can cause damage and reduce its lifespan and performance.
Will this cable work with my older Cat5 devices?
Yes, Cat5e cables are backward compatible with Cat5 devices, but the speed will be limited by the capabilities of the older Cat5 standard.
What is the difference between UTP and STP cables?
UTP (Unshielded Twisted Pair) cables, like this one, do not have metallic shielding. STP (Shielded Twisted Pair) cables have metallic shielding to provide better protection against electromagnetic interference (EMI).
Is the length of 5 meters measured from connector tip to connector tip?
> Info needed: Exact measurement standard for cable length needs confirmation.
What is the warranty period for this cable?
> Info needed: Warranty details are not provided in the product information.
Troubleshooting
No network connection detected
Ensure all RJ-45 connectors are securely plugged in at both ends. Try plugging the extension cable directly into the source device to rule out issues with the existing cable. Check that the device's network adapter is enabled.
Slow network speeds or intermittent connection
Check for physical damage to the cable. Ensure the cable is not routed near sources of electromagnetic interference. Try a shorter or different Ethernet cable to see if performance improves. Verify that your network equipment supports the desired speeds.
Cable is physically damaged (e.g., frayed jacket, bent connector)
Do not use a damaged cable. Replace the cable immediately to prevent potential short circuits or further damage to your network equipment. Contact the vendor for a replacement if within the warranty period.
Pros and Cons
Pros
- Provides additional reach for existing network cables.
- Cost-effective solution for extending network connections.
- Supports Gigabit Ethernet speeds.
- Standard RJ-45 connectors for broad compatibility.
- Complies with Cat5e standards.
Cons
- Unshielded design may be susceptible to interference in noisy environments.
- As an extension cable, it adds a connection point which can be a potential failure point.
- Limited to 5 meters, may not be sufficient for all extension needs.
- Pictures are for illustrative purposes only, actual product appearance may vary slightly.
Setup, Compatibility & Care
Setup:
- Ensure both the existing network cable and the device you wish to connect have available RJ-45 ports.
- Plug the male RJ-45 end of the Cables Direct RJEXT-05 into the female port of your existing network cable.
- Plug the female RJ-45 end of the Cables Direct RJEXT-05 into the RJ-45 port of your device.
- Your device should automatically detect the network connection.
Compatibility:
- Compatible with all standard networking devices using RJ-45 Ethernet ports, including routers, switches, PCs, laptops, smart TVs, game consoles, and more.
- Complies with Cat5e standards, ensuring compatibility with networks running at 10/100/1000 Mbps.
Care:
- Avoid sharp bends or kinks in the cable, which can damage the internal wires.
- Keep the cable away from excessive heat sources and moisture.
- Clean connectors gently with a dry or slightly damp lint-free cloth if necessary. Do not use solvents.
- Store the cable neatly coiled when not in use to prevent tangles and damage.