Spares2go Castor Wheels - Pack of 8 - 32mm

The product information does not specify a maximum weight capacity per castor. These are designed for light to medium weight equipment. Please assess your equipment's weight to ensure suitability.

These are fixed plate castors, meaning they allow for straight-line movement and do not swivel.

Screws or bolts are not included with the castors. You will need to provide your own appropriate fixings suitable for the material you are attaching them to.

The rubber wheels on a plastic rim with a non-marking material are suitable for a variety of indoor surfaces, including wood, laminate, tile, and low-pile carpet.

You can clean the castors by wiping them with a damp cloth. Ensure they are dry before reattaching or using the equipment.

These castors are primarily designed for indoor use. Prolonged exposure to outdoor elements may affect their performance and durability.

The mounting plate measures approximately 45mm in length and 20mm in width.

Ensure there are no obstructions around the wheel. Check that the mounting screws are not overtightened, which could impede rotation. Verify the weight of the equipment does not exceed the castor's capacity.

Clean the wheel and bearing area. A small amount of silicone lubricant can be applied sparingly to the axle if necessary, but avoid over-lubrication.

Re-tighten the mounting screws. Ensure the mounting surface is flat and solid. If the castor is damaged, it may need replacement.

While designed to be non-marking, heavy loads or specific floor types can sometimes cause scuffing. Clean the wheels thoroughly. For very sensitive floors, consider using protective mats.