Multi Material Drill Bit - 12mm

This bit is suitable for tile, brick, wood, cement, and PVC. It is designed for general-purpose drilling across these common materials.

For most materials like wood, cement, and PVC, no water is needed. For harder materials like tile or brick, water can help cool the bit and prolong its life, though it is often not strictly required for basic drilling.

Select the size based on the diameter of the hole you need to create. Common sizes like 6mm, 8mm, 10mm, and 12mm are available to suit various fasteners and project requirements.

While it can perform on some softer metals, this multi-material bit is primarily designed for masonry, wood, and plastics. For dedicated metal drilling, a specialized metal drill bit is recommended.

The lifespan depends on usage, materials drilled, and proper care. The tungsten carbide tip is designed for durability, but frequent use on hard materials will eventually dull the bit.

Yes, this bit is compatible with hammer drills. Ensure your drill is set to the appropriate mode for the material you are drilling.

Ensure you are using the correct drill setting (e.g., hammer function for masonry). Check if the material is too hard for this bit. Verify the drill is running at an appropriate speed and apply steady, consistent pressure.

Reduce drill speed and apply less pressure. Allow the bit to cool periodically. Ensure you are not drilling for extended periods without breaks.

Use a center punch to create a small indentation before drilling, or use a light-duty or temporary adhesive to keep the bit from wandering on smooth surfaces. Ensure the drill bit is sharp and in good condition.