Avit Flat Bit Set - 6 pcs

These bits are designed specifically for drilling into various types of wood. They are not suitable for metal, plastic, or masonry.

The set comes with a convenient wallet that can be hung on a wall, keeping all six bits securely stored and easily accessible.

The largest bit in this 6-piece set measures 32mm in diameter.

The ground wing spurs score the wood fibers before the main cutting edge enters, which helps to minimize tear-out and create a cleaner hole. Using a steady speed and pressure also contributes to cleaner cuts.

Yes, the brad point tip is designed for accurate starting. It centers the bit on the desired spot and prevents it from skidding across the surface.

While HSS bits can be sharpened, it often requires specific sharpening stones or grinding equipment to maintain the correct angles. If unsure, professional sharpening services are recommended.

The bits are constructed from High-Speed Steel (HSS) and are hardened for durability and performance.

Ensure the brad point is firmly seated on the marked spot before drilling. Apply steady, even pressure.

Reduce drill speed and ensure the ground wing spurs are making contact. Support the workpiece on both sides if possible, or use a backing board.

Check if the bit is dull. Clean any packed wood debris from the flutes. Ensure you are using an appropriate drill speed for the wood type.

Reduce drilling pressure and speed. Allow the bit to cool between holes, especially when drilling larger diameters or harder woods.