USB 3.0 Active Cable - Lindy - 10m

This cable supports USB 3.2 Gen 1 (also known as USB 3.0 and USB 3.1 Gen 1), with a maximum data transfer rate of 5 Gbps (5000 Mbit/s).

This active cable is recommended for low-power or self-powered USB peripherals. For high-power consuming devices, it is advised to use them with an independent power source or a powered USB hub to ensure stable operation.

It is commonly used to connect USB Type-B devices, such as printers, scanners, external hard drive enclosures, and audio interfaces, to a computer's USB Type-A port.

No, this is a plug-and-play cable. It does not require any additional drivers or software installation. It should be recognized automatically by your operating system.

Yes, USB 3.2 Gen 1 is backward compatible with USB 2.0 and USB 1.1 devices. However, the data transfer speed will be limited to the standard of the slower device or port.

The Lindy USB 3.0 Active Cable comes with a 2-year warranty.

The active electronics within the cable boost the USB signal, compensating for signal loss that typically occurs over longer cable lengths. This ensures a stable and reliable connection at 5Gbps over the full 10 meters.

Ensure both ends of the cable are fully inserted. Try a different USB port on your computer. Verify the peripheral device is powered on and functioning correctly. For high-power devices, try connecting them via a self-powered USB hub or their own power adapter.

Confirm that both the computer and the peripheral device support USB 3.2 Gen 1 (5Gbps) speeds. Check if the USB port on the computer is a USB 3.x port (often blue or marked with 'SS'). Ensure no other demanding USB devices are saturating the bus. Clean the connectors.

This active cable is designed to maintain signal integrity over 10 meters. If experiencing issues, ensure the cable is not damaged and is properly connected. If the peripheral is high-power, an external power source may be necessary for stable operation over this distance.