Harris Paint Roller Set - 4"

This roller set is designed for use with emulsion paints.

The roller is ideal for semi-smooth surfaces such as older plastered walls and walls with minor repair damage.

Remove excess paint, then wash the sleeve with warm water and a mild detergent. Rinse until the water runs clear and allow to dry completely.

No, this roller set is designed for use with emulsion paints only.

Do not overload the roller with paint and apply it at a consistent speed. Ensure that the roller sleeve is in good condition, and use the correct paint type. Rolling the excess paint off on the tray also helps.

The Harris Paint Roller Set is available in sets of 3, 4, or 6 pieces.

The lifespan of the roller sleeve depends on the surface and the paint being used. Proper cleaning and care will help extend its life.

Ensure the roller sleeve was properly rinsed before use. If shedding persists during painting, remove the fibers with a clean cloth and continue painting. Consider using a different roller sleeve if the problem continues.

Make sure the roller sleeve is evenly saturated with paint. Apply consistent pressure when rolling. Ensure that the surface is properly prepared and free of dust or debris.

Check that you are using the correct paint type (emulsion). Do not overload the roller with paint. Roll the excess paint off on the tray before applying to the wall. Consider the application speed and the condition of the roller sleeve. Slowing down the application can help with splatter.