Kenable Power Cord - Black

The IEC C13 connector is a standard 3-pin female connector commonly found on power cords for low-to-medium power electronic devices like computers and monitors.

This cable is suitable for devices with a C14 inlet, such as desktop PC towers, monitors, laser printers, scanners, projectors, and audio equipment, provided their power requirements do not exceed 5A.

The 5A fuse is a safety feature that protects your equipment and the power cord from damage caused by electrical surges or overcurrents. If the fuse blows, the cable will stop conducting power.

The UK 3-pin plug (Type G) is only compatible with sockets in the United Kingdom and a few other countries. The IEC C13 connector is universal, but you would need a different plug for other regions.

No, this cable is rated for 5A and is intended for standard electronics. High-power appliances typically require cables with higher current ratings.

Gently pry open the fuse cover on the UK plug using a small screwdriver or a fingernail. Remove the old fuse and insert a new one of the same rating (5A), then close the cover.

Ensure both ends of the cable are securely connected. Verify the wall socket is active by testing with another device. Check the 5A fuse in the UK plug for continuity.

Gently push the IEC C13 connector further into the C14 port. Ensure no debris is obstructing the connection. If damage is suspected, replace the cable.

Inspect the cable for kinks or damage. Ensure the cable is not being strained. Try a different wall socket. If the issue persists, the cable may need replacement.