Best current price£219.14from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£219.14Visit shop Storm White Polyx Wall Plate Self Supported - 4Mtr
Visit shop2 offers from £219.14
View price history by clicking the chart icon.
The PolyX Wall Plate (4mtr) is designed for professional builders and DIY enthusiasts looking to create a secure, weather-resistant junction between a conservatory or lean-to roof and an existing wall. Its key benefit is the integration of an integral flashing system and a user-friendly clip-down top cap that simplifies the sealing process. One notable caveat is that users must ensure the wall surface is perfectly level to maximize the effectiveness of the integral flashing seal.
| Colour | White |
|---|---|
| Model Part Number | WP4-W |
| Brand | Storm |
No, fixings are not provided as the appropriate type depends on the material of the wall the plate is being attached to.
The PolyX Wall Plate is specifically engineered for polycarbonate sheets; it is not recommended for glass installations.
This model is supplied in a 4-meter length.
The integral flashing is designed for standard weather protection, but a high-quality neutral cure sealant is recommended for the top edge against the wall to ensure a 100% watertight finish.
It is made from durable, white UPVC designed for exterior use.
Check that the polycarbonate sheet is fully inserted into the channel and that no debris is blocking the clip mechanism.
Verify that the integral flashing is seated flush against the wall; consider adding a bead of neutral cure silicone if the wall surface is uneven.
Ensure the sheet thickness is within the 16mm to 35mm range and check for any internal burrs in the extrusion.
To install, begin by ensuring the wall is clean and free of debris. Mount the backplate of the PolyX unit securely to the wall using appropriate fixings for the substrate. Slide your 16mm–35mm polycarbonate sheets into the rafter bars connected to the plate, ensuring they are seated correctly. Finally, apply the clip-down top cap until it snaps into the locked position.
Compatibility is strictly limited to Eaves Beams and Self Supported Rafter Bars designed for this system. For maintenance, clean the UPVC surfaces annually with a mild detergent and water to prevent the buildup of moss or debris in the flashing seal. Avoid using abrasive cleaning pads that could scratch the UPVC surface.
