Belt-Driven Air Compressor - Draper

Refer to the product manual for oil change intervals. Typically, change the oil after the first 100 hours of operation and then every 300 hours or annually, whichever comes first.

Consult the manual for the location of the air filter. You may need to remove a cover to access it. Clean the filter with compressed air, or replace it if it's excessively dirty or damaged.

Use a compressor oil that meets the manufacturer's specifications. Check the product manual for the correct type and viscosity.

The pressure regulator allows you to control the output pressure of the air, ensuring it matches the requirements of the tool you are using.

Regularly inspect the belt for wear, cracks, or fraying. Ensure proper tension, and replace the belt if any damage is observed.

Always wear safety glasses when operating the compressor. Never exceed the maximum pressure rating. Ensure the compressor is placed on a stable surface and in a well-ventilated area.

Check the power supply and ensure the on/off switch is in the 'on' position. Check for tripped circuit breakers.

Check for leaks in the air hoses and connections. Inspect the pressure switch and regulator.

Allow the motor to cool down. Check for obstructions to airflow and ensure the thermal overload protector is not activated. Consider a duty cycle that's more suitable for your application.