Flair Explorer Single Playhouse Bed Frame - White

This bed frame is designed to fit a standard single-sized mattress (typically 90cm x 190cm or 3ft x 6ft3in).

Yes, full assembly is required. The bed frame comes with all necessary parts and instructions for self-assembly.

The bed frame is constructed from a solid pine frame and finished with a smooth white lacquer.

The dimensions are H:142.0 cm x W:98.0 cm x D:196.0 cm.

To clean the bed frame, simply wipe it down with a soft, damp cloth. Avoid using harsh chemical cleaners or abrasive materials, which could damage the finish.

Yes, its low-to-the-ground design is specifically intended to be safer for younger children, making it easier and safer for them to get in and out of bed.

Carefully re-check all connections. Ensure all screws, bolts, and fasteners are securely tightened according to the assembly instructions. Sometimes, a slight overtightening of one part can cause imbalance; loosen slightly, adjust, and re-tighten evenly.

Confirm that each slat is properly seated within its designated slot or attached securely to the frame. If squeaking persists, you can try placing thin felt pads or strips of fabric between the slats and the frame to reduce friction.

For light surface scratches, you may be able to gently buff them out with a soft cloth and a small amount of non-abrasive furniture polish suitable for lacquered surfaces. For deeper scuffs, a touch-up paint pen in a matching white shade might be needed, applied carefully to blend with the existing finish. Always test in an inconspicuous area first.

While low-to-the-ground, some very young children may still benefit from a small, sturdy step stool for initial independence. Ensure the mattress is not excessively thick, as this can increase the overall bed height slightly. Practice getting in and out with supervision to build confidence.