Sealey Air Impact Wrench - 3/4"sq Drive - SA4

The Sealey SA4 has a fastening torque of 520lb.ft (707Nm) and a breakaway torque of 540lb.ft (734Nm).

The tool requires a robust air supply. Consult the tool's manual for specific CFM and PSI requirements, but generally, a higher capacity compressor is recommended for heavy-duty use.

It is recommended to lubricate the tool with a few drops of air tool oil daily, by introducing it into the air inlet before use.

No, this is a heavy-duty impact wrench designed for demanding applications. Its high torque may be excessive for delicate tasks and could cause damage.

The drive size is 3/4" square drive.

The tool features a reversible action, typically controlled by a selector switch or lever located on the body of the wrench. Simply move the selector to the desired direction.

Check air pressure from the compressor, ensure the air hose is of adequate diameter and length, and verify the tool is properly lubricated. Clean air inlet screens if clogged.

Inspect the forward/reverse selector switch to ensure it is fully engaged in the desired position. Check for any obstruction in the mechanism.

This can indicate internal wear. Ensure the anvil and hammer mechanism are intact and properly seated. Professional servicing may be required.

Check all air line connections. If leaks are from the tool housing itself, it may require disassembly and seal replacement by a qualified technician.