OB1 Waterproof Tanking Solution - Grey

It can be applied to most wall and floor surfaces, including concrete, cement, plasterboard, and plywood. Always test a small area first.

Drying time is typically 24-48 hours, depending on environmental conditions (temperature and humidity).

Priming may be necessary on certain porous surfaces. Refer to the product instructions or the manufacturer's recommendations.

Yes, you can apply tiles directly after the membrane has fully dried, following standard tiling procedures.

Yes, it is suitable for exterior elevations, balconies and facades.

Check the product packaging for the expiration date.

A brush or roller, a mixing container, and appropriate personal protective equipment (gloves, eye protection).

Ensure the surface is clean, dry, and free of contaminants. Apply a primer if necessary.

Check for excessive movement or vibration. Ensure the coating is applied at the correct thickness and consider using reinforcing joint tapes.

Check for damage or incomplete coverage. Reapply the coating to affected areas, ensuring proper overlap and adhesion.

Ensure adequate ventilation and proper temperature. Check the expiration date of the product.