Best current price£47.64from eBay
Shopping.co.uk recommended and popular offers
eBay£47.64Visit shop LASER 9197 Compact Under Bonnet Work Lamp 10W COB Infrared Motion Sensor
Visit shop
Amazon£47.65Visit shop Laser 9197 Under Bonnet Compact Work Lamp - 10W COB Infrared
Visit shop5 offers from £47.64 - £47.65
View price history by clicking the chart icon.
This Laser Tools work lamp (model 9197) is designed for mechanics and DIY enthusiasts who need versatile lighting for under-bonnet work or other tasks requiring hands-free illumination. Its key benefit is the strong magnetic ends that allow it to attach to ferrous surfaces, freeing up your hands. A potential caveat is its limited battery life on high brightness, requiring consideration for longer tasks. The lamp features two brightness levels (500 and 1000 lumens), infrared functionality for touchless operation, and USB-C charging.
| Model Part Number | 9197 |
|---|---|
| Brand | Laser |
The working time is approximately 2 hours on high (1000 lumens) and up to 5 hours on low (500 lumens).
Use the included USB-C charging cable to connect the lamp to a USB power source. Charging typically takes between 3.5 to 4 hours.
The lamp provides 500 lumens in low mode and 1000 lumens in high mode.
Yes, the magnetic ends can be angled individually to allow the torch to be securely attached to various ferrous surfaces, offering flexibility in placement.
The lamp has an IP20 rating, which means it is protected against solid objects larger than 12.5mm but is not protected against water. It is not suitable for use in wet conditions.
The IK07 rating indicates that the lamp is resistant to impact, specifically 2 joules of impact, which is equivalent to dropping a 200g object from 1 meter. This makes it suitable for workshop environments.
Typically, you need to press and hold the power button for a few seconds to activate the infrared mode. A confirmation light usually indicates it's active. Refer to the product manual for precise instructions on activation and deactivation.
Ensure the lamp is fully charged. Connect to a USB power source using the included USB-C cable and check the charging indicator. If fully charged and still not turning on, contact customer support.
Clean the magnetic surfaces on both the lamp and the mounting surface to remove any dirt or grease. Ensure the mounting surface is made of ferrous material (iron or steel).
Ensure the infrared function is activated (check manual for activation steps). Make sure there are no obstructions between your hand and the sensor area. Clean the sensor area with a dry cloth.
The lamp has two brightness modes. Using the high (1000 lumens) setting will deplete the battery faster than the low (500 lumens) setting. Use the low setting for tasks that do not require maximum brightness to extend working time.
Setup: No complex setup is required. To use, simply charge the device fully using the provided USB-C cable before its first use. Once charged, press the power button to cycle through the modes: COB low, COB high, and off. The infrared function can be activated by pressing and holding the power button for a few seconds until an indicator light appears (refer to manual for specific indicator details).
Compatibility: The lamp is powered by a built-in Li-ion battery and charges via a standard USB-C port. Any standard USB-C charging cable and a suitable USB power source can be used for charging.
Care: To maintain performance and longevity:
