Best current price£5.29from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.29Visit shop Kenable 5.5 X 2.1Mm Dc Power Plug To Socket Cctv Extension Cable 10M White
Visit shop
Amazon£6.24Visit shop Kenable Men's White Dc Power Extension Cable 5.5Mm X 2.1Mm Plug To Socket For Cctv Security Cameras 10M
Visit shop4 offers from £5.29 - £6.24
View price history by clicking the chart icon.
This Kenable DC Power Extension Cable is designed for users needing to extend an existing 2.1mm DC power connection, primarily for CCTV equipment or other low-wattage appliances up to 60 watts. Its key benefit is providing extra reach and flexibility for power setups. A crucial caveat is the need to verify connector compatibility, as various DC power extension types exist.
| Model Part Number | 5.5 X 2.1mm |
|---|---|
| Brand | kenable |
This cable features a 5.5mm outer barrel diameter and a 2.1mm inner pin diameter for the DC power connection.
This cable is designed for low-wattage appliances up to 60W and typically uses a 5.5mm x 2.1mm connector. Most laptops require higher wattage and may have different connector types. Please check your laptop's power adapter specifications before use.
If the outdoor CCTV camera uses a 5.5mm x 2.1mm DC power input and its power consumption is within the 60W limit, this cable can be used. However, ensure proper weather protection for the connections if exposed to the elements.
The cable is rated for a maximum of 60 watts (60W) or 60 volt-amperes (60VA).
Verify that your device's power input port matches a 5.5mm outer barrel and a 2.1mm inner pin. Also, check that the device's power consumption does not exceed 60W. Consulting your device's manual or manufacturer is highly recommended.
Moulded ends refer to the connectors being formed directly onto the cable during manufacturing. This creates a strong, integrated connection that is less prone to breaking or separation compared to crimped or otherwise attached connectors.
Check that all connections are secure at both ends. Verify that the power adapter is functioning and providing adequate power. Confirm that the device's power requirement does not exceed the cable's 60W rating. Double-check that the connector size (5.5mm x 2.1mm) is correct for both the adapter and the device.
Ensure the molded ends are fully seated and making a firm connection. Inspect the cable for any signs of damage. If the issue persists, the power adapter or device may be at fault, or the device's power draw might be too close to the 60W limit, causing instability.
This may indicate the device is drawing close to the 60W maximum. Monitor the temperature; slight warmth is normal, but excessive heat suggests the device may be exceeding the cable's capacity. Disconnect immediately if it becomes too hot to touch and consider a higher-rated cable or a different power solution.
Setup:
Compatibility:
Care:
