Truma Ultraflow Waterline - 15m

The hose is 15 meters in length.

This hose connects to standard mains water taps typically found at campsites. You may need a specific adapter for certain tap types.

This valve reduces the incoming mains water pressure to a safe level for your caravan or motorhome's internal water system, preventing damage.

No, this hose is designed specifically for direct connection to a mains water supply and is not suitable for filling water carriers.

The hose itself can be used in cold weather, but it's crucial to drain it completely after use and store it protected from freezing to prevent damage.

After draining, you can rinse the hose with clean water. For internal cleaning, a mild, food-safe cleaning solution can be used, followed by thorough rinsing. Ensure it is stored dry.

If the pressure regulator fails and allows excessive pressure, it could potentially damage your vehicle's water system. Always check for leaks after connection and monitor your system.

Check that the mains water tap is fully open and that the hose is securely connected at both ends. Ensure no kinks are present in the hose. Verify that the campsite's water supply is active.

Inspect the hose for blockages or kinks. Ensure the Ultraflow inlet on the vehicle is not obstructed. Check if the campsite's mains pressure is exceptionally low.

Ensure the hose is firmly attached to both the tap and the vehicle inlet. Check the condition of any seals or O-rings. If leaks persist, consider using a different adapter or replacing the hose if damaged.

Flush the system thoroughly. Ensure the hose is clean and has been stored properly. If the taste persists, the issue may be with the campsite's water source.